Extreme Tools DX Series DX5509HR 55″ x 25″ Roller Cabinet and Hutch Combo
$3,695.99
$2,425.99
DX5509HR DX Series 55-in W x 25-in D Extreme Power Workstation® hutch and 8-Drawer Roller Cabinet with Power Tool Drawer Combo
Extreme Tools DX Series DX5509HR 55-in W x 25-in D Extreme Power Workstation and 8-Drawer Roller Cabinet Combo features a HUGE power tool drawer. The power tool drawer is equipped with a universal 6-slot power tool rack, power strip with 6 outlets and 2 USB ports, small parts organizer with adjustable steel dividers, shelf for storing and charging batteries or small tools, plus PVC shelf and drawer liners. There are two 51-inch full-width drawers to store hard to fit tools. Patented self-latching DX Quick Release full-width drawer pulls are constructed with all metal components and allow you to open the drawer with one hand. Each drawer uses ball bearing slides that let you load 100 lbs for single slides and 200 lbs for double slides. The four 6in x 2in Mag Wheel casters are load rated 900 lbs each and are supported by 14-gauge steel construction. The roller cabinet comes with heavy duty drawer liners and a PVC coated MDF work surface. The hutch includes an adjustable powder-coated steel shelf with built-in hand tool organizers. Attached to the shelf is a 3-outlet and 2 USB port power strip and Power Tool Rack accessory which allow you to use and charge your tools in your workspace. The powder-coated steel pegboard side and back panels provide a convenient space for hanging equipment. This huge combo gives you loads of space at an affordable price with the assurance of Extreme Tools quality. HUTCH ASSEMBLY REQUIRED.
- Huge Power Tool Drawer: a) Power strip with 6-outlets and 2 USB ports b) 6 large and 4 small docks for holding and charging power tools c) Shelf to store and charge batteries or small tools d) Small parts organizer with adjustable steel dividers e) Shelf and drawer liners;
- Patented DX quick release self-latching drawer pulls are constructed with all metal components – no plastic to bend or break;
- All metal drawer latching system – no plastic to bend or break;
- Full-extension ball bearing slides load rated 100 lbs for single slides and 200 lbs for double slides;
- Four 6 in x 2 in Mag Wheel casters (2 locking swivels and 2 rigid) load rated 900 lbs each;
- Includes PVC laminated MDF work surface to protect the top of the roller cabinet;
- Includes PVC drawer liners to protect the drawers and your tools;
- Akzo Nobel high gloss powder coat finish on tool box and drawer pulls keep it looking great;
- Hutch includes an adjustable shelf and power tool rack accessory;
- Power strip is attached to hutch shelf and has 3 outlets and 2 USB ports;
- Hutch is constructed with high gloss powder coated steel pegboard side and back panels and creates a convenient space to hang tools and equipment;
- Hutch assembly required
| Weight | 480 lbs | Dimensions | 54.625 × 25 × 64.75 in |
|---|---|---|---|
| Color Selection |
Black/Blue ,Black/Red ,Blue/Black ,Green/Black |
Size | |
| Finish |
German AkzoNobel High Gloss Powder Coat |
Number of Drawers |
8 |
| Warranty |
Limited 5 Year |
Lock Style |
Tubular Coded |
| Drawer Liner Type |
PVC |
Product Materials |
Steel |
| Shell Gauge |
14 ,16 |
Caster Type |
2 Swivel & 2 Rigid |
| Drawer Slide Type/ Capacity |
Ball Bearing Slides – 100/200 lbs |
Number of Casters |
4 |
| Series |
DX Series |
DX Series
What makes the DX Series Extreme?
Innovative, creative thinking is where Extreme Tools® starts its product development process. Our goal was to make a professional self-latching drawer pull at a more affordable cost. Our efforts were a success! We re-created and patented the DX Series Quick Release drawer pull. This line of drawer pulls is strong, sturdy and made from powder-coated steel so that they last. The DX Series drawer pulls fasten across the front of the drawer so that the handle never pulls away from the drawer or bends when you pull on it. We use heavy-duty steel hooks to hold the drawers closed so that you do not have to worry about them opening if you move your tool box. Plus, our patented design still allows you to open the drawer from anywhere on the drawer pull with just one hand.
Like our other series, Extreme Tools® tool boxes always start with a strong base. The DX Series roller cabinet frame is constructed from 14-gauge steel so it can handle the weight of your tools. Then, we outfit it with our exclusive Mag Wheel casters which can hold up to 900 lbs. each to support your loaded box.
The drawers are constructed from heavy-duty, powder-coated steel so that they hold up whether they are in a professional setting or at home in your garage. We included two extra long drawers and two extra deep drawers to accommodate tools both long and bulky tools. Each drawer can hold 100 lbs. if it has single slides and up to 200 lbs. if it has double slides.
Extreme Features
In addition to roller cabinets, the DX Series offers Extreme Power Workstation® hutches and side lockers. The patented design of our hutch assembles easily on the DX roller cabinet and features an adjustable shelf with laser cut openings to hold and organize a variety of small hand tools. The shelf is equipped with an attached power strip that houses two USB ports and is engineered to hold a variety of accessories: socket holder, media/tech holder with charging pad, and power tool rack. The side and back panels are constructed from powder-coated steel peg board which allows you to hang tools and equipment. Matching side lockers come with 4 adjustable/removable shelves to accommodate both large and small items.
To protect the DX tool boxes, we use a specially formulated AkzoNobel powder coat finish that resists chemicals, scratches, rust and stains. This high-quality powder finish allows Extreme Tools® to offer a variety of color combinations to suit a wide range of tastes.
As it is with all our tool boxes, Extreme Tools pays attention to the extras that make a difference. A side handle and PVC drawer liners are always included. We also provide a PVC laminated MDF work surface to protect the top of the roller cabinet. And, when it is time to lock it up, we installed a secure, tubular coded lock with two keys, so your tools stay safe.
The DX Series comes with a Five Year Limited Warranty and the promise of Extreme Tools® superior quality and customer service.
EXTREME TOOLS DOCUMENTATION
DELIVERY & FREIGHT INSPECTION GUIDE
MANUFACTURER WARRANTY
REGISTER YOUR EXTREME TOOLS WARRANTY
Please fill out and submit your warranty registration using the Form below within 30 days of your purchase.
WARRANTY REGISTRATION FORM
ALTERNATIVE METHODS
Alternatively, you can Download your Warranty Registration Form, fill it out and Send it to us by choosing any of the following methods:
sales@extremetools.net
MAILING ADDRESS
Extreme Tools®️, Inc. 740 Frontenac Rd, Naperville, IL 60563 U.S.A
FAX
815-254-1930
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.